Automatic L bar shrink machine can be equipped with conveyor, its structure with respect to semi auto shrink machine structure is complex, the heat shrink machine has certain operation order,hold the sequence fault conducive to better use and troubleshooting of L bar sealer
  1 Turn on the power switch,adjust to suitable temperature, but due to room temperature and thickness of raw material, there may be some differences.
  2 According to the packaged adjusting triangular plate expanders with height, width is necessary to adjust width of goods. The adjusting screws, height adjustment screw height adjusting triangular plate expanders above, and keep 1 cm distance.
  3 Set aside width is packing to stop between the position and the horizontal seal cutter centerline distance, please set it in the packing height above 1/2.
  4 Goods stop time controller (belt conveyer stop time) there will be continued to the seal cutter center line and packaging of stopping distance set in the packing height 1/2.
  5 When the good'height behind 6cm , please set raw material reservation length.  
  6 After the height, width setting please follow the shrinking film device installed shrinkage film method.
  7 When the seal cutter reaches the set temperature, pull out the raw material will be open end sandwiched material clamping slot, press the manual control switch for sealing.
  8 Open start switch, conveyor belt, then as long as the items will be placed on the conveyer belt can self sealing packing.